Gloves for horizontal bar with his hands

Most people involved on the horizontal bar, wondering where you can take the gloves horizontal bar. After all, after school calluses may appear, which they do not look very nice. And in general, they can be delivered to its owner a lot of trouble. In addition, because of the calluses on the horizontal bar exercises can bring discomfort as arms will ache.

Why the gloves?

Many believe that for a horizontal bar gloves are not necessary, but the athletes who are engaged in more than one year, it is advised to purchase them. Indeed, after the pull-ups and perform other tricks blisters may appear, which is not decorate the hands of men. Perhaps in the future you want to work for a good company, but you can go there and do not take if the appearance of the hands is not relevant.

In addition, while having your hands start to sweat. And this, in turn, leads to a slip with a horizontal bar. If you wear gloves, they will increase the friction, resulting in reduced slippage. It is therefore desirable not to start performance of tricks without gloves. In addition, you can make them at home and out of scrap materials and other gloves.

Selection of materials for sewing gloves

Gloves for horizontal bar can be made from ready-purchased products. And belonging to different price categories. It is important that for the horizontal bar gloves were comfortable and durable. It should also be remembered that in the case of cycling gloves are some nuances. Very often, their rear side is open. While the manufacturer has made it so special, for better ventilation. Therefore, in winter they will be quite cold, although the summer is a very easy to use. To deal with them on the bar in the winter, you need to pick up a soft material and make it a two tabs, which are completely closed holes. If leather gloves, and the material for closing holes must also be so.

In the construction of gloves has its drawbacks, too. First of all, it is their quality. Just a few workouts can completely ruin them. Negative sides have any gloves, even the most expensive. That is why many choose to make them for themselves. But first things first.

to alter construction gloves

Many wonder how to choose the gloves horizontal bar. It is not necessary to give a lot of money. After all, even the usual construction gloves can be used in the classroom on the bar. Even more so that they can be easily and quickly alter. Of course, their appearance does not attract attention, but they are quite inexpensive. Due to this, you can buy several pairs, and after that - to use them as long as they do not wear out to the holes. But it is not a cheap gloves, but the more expensive, which rubberized palm. They make training on a horizontal bar is much more comfortable. You can buy them in the hardware store, and in the market. The second option is likely to be cheaper.

Usually these are the gloves no more than 30 rubles. I found some of their species, that also affects the cost: with pimples, and fully rubberized strips. In order to make good gloves for the bar, it is necessary to take two pairs of the above products. You need both hands to put on and take off, so they were in one another. Now you need to sew them together to make them thicker.

How to alter cycling gloves

They are also often put on athletes engaged on the bar. Usually they are made of relatively dense material, so thanks to them rarely appear calluses on his hands. Cost models is varied and ranges from 200 to 2000 rubles. Another advantage of them is that they are made of leather, so hands are not slide at all. Usually, however, to create them using very thin skin, so they quickly lose their appearance and tear. These products have a number of drawbacks. They are not always convenient to use. In particular, it noted the men, have rather large hands. In addition, despite the high cost, they can be used no more than one season, as they wear out very quickly. To facilitate their use in the classroom on the bar, it is necessary to take elastic and sew her up. It should be enough to wrap the arm. For example, during the execution of tricks you can not worry about what hands slide.

Can I alter lifter gloves?

You can use the lifter and gloves for pulling on the bar. They are cheap: from 300 to 800 rubles. The main advantage of such products is that they provide good ventilation hands. In addition, the palm has dense coating leather, whereby the hands are not slipping. However, because such a thick skin, they may not always be convenient. However, experts say that this is one of the best models that can be used while working on the bar. But to deal with them in the summer, you should remove the inner cover. This can be done with a knife. Of course, we must act very carefully.

woolen gloves

Can approach the usual woolen gloves for training on a horizontal bar. Their cost ranges from 200 to 1000 rubles, but can be found cheaper options. It is very convenient to use them with special straps, because without them the hand will slide rather strongly. Wear them only in winter, but the summer of them should be abandoned. Anyway, carry with them turns out not all of the elements, since it is very much hands glide. To avoid this, you can take leatherette, wear gloves and move the hands on the size of the material. Then cut and sewn to the glove palm.

Where to buy gloves?

The cost of the glove is different, and it usually depends on their type. Buy such products can be in a specialty store or market. Both options have their pros and cons. Gloves on the market are much cheaper, but buying them in a store, you can be sure of their quality. In addition, buying products, you need to know the exact size of your hands. Therefore, before going for shopping it is recommended to measure your hand inch to determine the approximate size. Usually sellers do this yourself. Of course, it is possible to measure the gloves in the shop to choose the most suitable.

By the way, you can sew gloves horizontal bar with your hands. To do this, you need to buy only the material used in the process.

Sewing of gloves from scrap materials

Many people wonder how to make gloves for the horizontal bar with your hands. Such products have a great advantage: to be used only proven materials for sewing, so the durability of the glove can be improved. The first thing to determine is how the fabric will be used for their manufacture. Typically, the choice is between the artificial leather and leather. Of course, quite possible to independently make such products, but you need to have at least a primitive skills of sewing.

Now you need to determine the size of your hand. It is necessary to measure. If you do not want to measure anything, you can attach the hand to the fabric and cut around it with chalk or a piece of soap. Then cut the two parts for each hand and sew them together. At the top is better to sew the Velcro to the gloves easier to put on and remove. Decorate derived products can be buckles, chains and the like. Although these trinkets can only get in the way while working on the bar. To the glove did not lose its shape, it should be stored in a bag or box.

begins to engage on the bar is not worth without gloves. After all, so they can appear not only corn but also a variety of injuries. Hands greatly glide, so you can fall. And it is fraught with sprains and even fractures.