Brake pads for bicycle - review, types, features and reviews

An efficient brake system on the bike is the key to safety. But you need to know for a common understanding of how it is set up and running. An important detail considered brake pad for a bicycle. On them will be discussed in the article.

Overview

Pads of different shape, appearance, materials. From a huge variety of difficult to make the right choice. As the reviews cyclists, these items should be bought depending on the type of transport and destination. To purchase a suitable brake pad for a bicycle, the following nuances should be considered:

1. transport type. For pleasure, children's and amateur species should not choose expensive devices.
2. View of the braking system. Depending on this pad may vary shapes and sizes.
3. Frequency of use. It really is important, as is often used transport - a few times a year or regularly.

The brake pad for a bicycle operating under the influence of friction on the inner portion of the wheel or rotor. This resource is consumable as they wear out, so they need to be changed. According to user feedback, it should be done regularly to the braking system was always intact.

The principle of operation

Brake pads for the bike works as follows:

1. After pressing the brake lever cable is driven by a special mechanism.
2. The mechanism is simple, with a tension cable it will fit snugly to braking surface of the rim (if V-brake) or the rotor (if a disc brake). The abutting surfaces are the pads.
3. At the final stage, they fit snugly to the surface, is slowing down the rotation of the wheels. The strength of pulling the rope friction force depends, as well as the wheels stop.

As the reviews, the replacement of brake pads on a bike you need to perform after will be the first signs of deterioration of their work. Prompt treatment will ensure quality work braking system.

Types of brakes

Pads are:

1. drum.
2. V-brake.
3. disk.

vehicles with drum brakes is rare. They do not work as the rest of species. Such a system is known to many from his childhood. It is considered expensive to repair, so the set is extremely rare.

V-brake

These brakes are the most popular, as are present on most bikes. They are cheap and simple, but reliable. Set them usually urban, children, budgetary means of transport. On these bikes a little speed, hard braking so it is not necessary for them.

The main parts include a mechanism:

1. Brake levers. It is mounted on the steering wheel and drives the launch of the entire system.
2. Cable. Thanks to him, the tension is transmitted and the reduction of leverage.
3. Levers. Mounted on the front fork and top feathers.
4. Brake Pads. Fastening occurs on the levers, parts in contact with the brake surface.

As the feedback mechanism is fairly easy to maintain. Pads have an oblong shape. Usually they are made of thick rubber, fixed to a steel or plastic base. What is the cost of brake pads on your bike? Cost is determined by the quality of the materials. The price starts from 700 rubles. Cheaper parts are ground 1-2 season with regular skating, they have to be changed frequently.

Disk

Disc brake pads for bicycle rare. Details are expensive, but durable and reliable. Their price reaches 1,700 rubles or more. These elements are considered to be complex to install and configure. Usually they are mounted on costly transport models, racing bikes and other sporting facilities.

The mechanism consists of:

1. Handles and rope. They are the same as in the previous version.
2. Brake disc. Fastening occurs to the sleeve 6 bolts.
3. Adapter. It is a mechanism for securing the caliper to the frame.
4. caliper. On the part actuated block.
5. pad. They pressed disk, and so braking is triggered. they are round in this system.

Brake pads for disc brakes bicycle can be mechanical or hydraulic. In the first case it is amplified through the cable, and the second - by filling the system with liquid. Feedback from newcomers mechanical version is more suitable.

The creaking of brakes

Often on bikes much creaking pads during braking. With a strong clamping with sound vibration appears braking surface and scrolling wheel forward. In the latter case there is serious damage to the lining due to wear and tear: the pressing members erased the rim, but they can not squeeze, so the wheel slips. In sharp sounds do not operate the system, it is necessary to know the cause of this phenomenon and fix it.

The unpleasant sounds appear on the rim and disc brake systems. The reasons for this phenomenon are as follows:

1. disc is dirty or the rim.
2. pads oily contamination.
3. The rigidity of pad material.
4. Wear.
5. An inappropriate position relative to the rim.

When creak should pay attention to the surface: such a phenomenon occurs due to the accumulation of dirt, fat and moisture. Cleaning is done with solvent: white spirit or petrol. parts then wiped dry, clean pictures.

With the accumulation of oil should not be placed on the brake lining area. They are calcined to combustion spots. This is done on a heated surface or above the burner. After the disappearance of traces pads are left outdoors. With such a procedure, they will not be long, but high-quality options, for example, by Shimano, withstand heat and may be used is still quite a long period.

The hardness of the rubber friction force depends. But dense material wears out quickly is not as soft. A disadvantage of the soft pad is low braking efficiency. They rarely make noise, they need frequent replacement. At discrepancy material and the braking surface occurs rapid wear. To avoid this, you need to choose the original parts in specialty shops.

Set V-brake

Replacement of brake pads on a bicycle is a simple process. Mechanism for V-brake procedure is as follows:

1. Pens must be installed on the steering wheel. For their attachment should choose a convenient place.
2. Then you need to stretch cables and levers to insert into the grooves.
3. Then he should press the levers to the brake system and lock. The distance from the pad to the rim should be 1-3 mm.
4. Next, operation of the system is checked.
5. Before setting up the levers, it is desirable to lubricate grooves. These items must be equidistant from the rim to wear was uniform.

Set disk

Replacing disk brake pads on a bicycle in the following way:

1. on the steering wheel should fix brake levers.
2. Caliper is installed in its place.
3. The rotor must be fixed to the hub.
4. A rope is necessary to carry out from the handle to the caliper.
5. pads are inserted into the caliper, and then fixed.
6. Brake shoes must adjust the special bolts. Their distance should be 1 mm.

Thus, the purchase and installation of the brake system is a key factor to ensure the safe operation of the vehicle. To select the appropriate model, it is advisable to consult with the seller. It is important to choose suitable to his bike brake pads.