Correction of nails. Correction of extension nails at home

If you increase the nails have not every girl will risk yourself, here to conduct correction procedure, tries every second. It should be noted that this process is not very easy, and sometimes even more difficult than modeling itself. Correction of nails is a procedure to restore the material to preserve the appearance manicure look, as well as to minimize the risk of injury, splitting and cracking on the nail plate.

Technology

Capacity is based on two technologies: acrylic and gel. Correction of nails also vary, depending on what exactly material nail modeling procedure was carried out. Each technology increasing its pros and cons, its own characteristics that must be considered at all stages. And nail correction is not an exception.

Overview

Before you get started, you need to learn the basic general rules. Firstly, any procedure that involves the use of tools, should be safe. We must carefully handle all disinfectants. With regard to this, and nails, and tools. Secondly, at home nail correction is faster by using a special manicure machine. Not necessarily to get professional model. Machine for nail correction can be semi and general home (with weak turnovers). Nozzles also need to be disinfected so as not to carry infection at work.

to gel Correction Materials

In the treatment of nails, of extension of gel technology, the following materials are needed:

gel for modeling;
antiseptic;
degreaser;
primer acid-free;
Cuticle Oil;
the liquid layer to remove the adhesive.

This is the minimum. If the nails are built up one-phase gel, it also can be used for correction. If the technology was a three-phase, it is suitable any system.

gel for correction Tools

The minimum set of tools that will help carry out the correction quickly and easily, consists of:

UV lamp;
lint-free wipes;
pusher or orange stick;
buff for polishing nails;
gel for nail files (100/100 grit 150/180 grit);
manicure machine (if it has one, if not - only nail files);
brush for modeling gel nails;
nail cutters for artificial nails;
cutters or blades for cutting cuticles.

It is noteworthy that for manicure machine can replace several instruments, since it is possible to carry out most of the work on sawdust.

The procedure step by step instructions in

First of all, your nails and hands treated with an antiseptic, to risk during operation to place the slightest infection has been reduced to zero. If a manicure is made varnish, then it must be erased. Cuticle pusher or orange push sticks. After that, it is removed by forceps as carefully as possible so as not to injure the finger. Masters recommend replacing trim edging method to carry out a 100% guarantee of safety procedures. The next step - degreasing. Special agent dripping on a lint-free cloth, which is carefully trimmed nails. After this step up to plate his hands did not touch, so as not to spoil the clutch materials. In this training ends. Correction of extension nails involves several stages.

Step number 1: thickness

If you apply an infinite number of layers of material, the nails become thick, bochkovatymi and vulnerable to attacks. Not to mention the fact that the entire building beauty will come to naught. That is why, after preparing the first thing removed material thickness. You can do this or a special nozzle on the machine, or nail file 100/100 grit, as the gel is not too easy to cut by hand with a soft sandpaper. The thickness removed by exactly half available. The region between the cuticle and the material (there is a natural plate) zapilivaetsya gently with a soft sawing (150/180 grit). If the gel became much crawl at this point, there are cracks and discharge of, his carefully cut down as long as not only a strong bond remains.

Step number 2: the length of

Correction of extension nails implies the removal of excessive length. It appears as a result of natural growth plates, which gel "creeping" up. This increases the length. If it is unacceptable and uncomfortable to wear, it is reduced. Too much is removed cutters, medium and small - cut down machine or nail file. Correction of nails form can be carried out at this moment, if that is permissible. That is, a square (the standard and the most common form) can be washed down to the oval, almond or circle. Typically, the length is removed 1-2 mm. If the correction is carried out later when the nails are strong industry, up to 5 mm.

Step number 3: treatment of

After all the work on sawdust will be successfully implemented, the resulting dust is removed with a brush. In addition, the nails treated with degreaser again, then - a primer. The latter is a special liquid, which is intended to form a durable bond between the old layer of material, a natural nail and a new layer of gel. The primer dries in air for several seconds. In this case, the nail plate can slightly turn white, but this is absolutely normal. Before the primer can not touch his hands, it is desirable that it does not fall on the man-made material.

Step number 4: modeling of

Correction of nails is vykladyvanii new material to the old and to the natural nail. Performed everything exactly the same way as in the building. That is in compliance with all the rules: the gel should not be exposed to the inner lining or the side bolsters, the apex remains in place, the convex shape is maintained. Each layer is dried in the tube as much as required to guide material. Carefully sealed ends of the gel is not crawled and is not cleaved. Dry is necessary not only on the outside but on the inside, otherwise the sealing will not work.

Step number 5: finish

Once the necessary manipulations will be carried out, proceed to the final step. Floor polish finish-gel which can be either an adhesive layer (it is removed), and without it. When it dries under the lamp, is applied to the cuticle oil. After this correction procedure is considered ended.

Acrylic Correction

It is not much different from a gel, a material different dry - without UV lamp. In addition, zapilivanie and processing carried out nail file, which abrasiveness 150/180 grit. Too tough sawing there is a risk to cause injury to nails. The rest of the procedure is similar to the gel. As degreaser may be used for varnish removal means, but instead professional antiseptics, e.g., formic acid or boric alcohol. To gloss on acrylic stayed longer, the last layer is made by means of a finishing gel, which is dried in a special lamp. This combination makes the nails stronger - they become more resistant to the effects of negative factors. All brushes for the material (and gel, and acrylic) must be made of natural cloth. Lint-free cloth as needed to ensure that even the smallest particles of tissue adheres to the material.

Natural nails and correction of

Correction of nails at home is carried out not only of extension nails, but also on the natural. The procedure is called a "manicure". There are several types of it: cut, uncut, hardware. Each of them in his own good. For example, the hardware does not require steaming, but need a manicure machine. Trimmed to cope with complex and advanced cases. A edging manicure is the most simple: no trebuyuetsya any special apparatus or sharp or dangerous instruments.

Special Occasions

Correction of ingrown nail plate is performed first manicure machine and is considered a special case in the manicure business. Firstly, you must first steam out problem finger. Secondly, you need a machine with nozzles. Step by step procedure is as follows:

The nail steamed, then treated with antiseptic.
The skin of an orange stick or push back the pusher.
All of that can be treated with conical nozzle is treated. This applies to the cuticle, side bolsters, the skin on the nail.
Then, the nail plate is degreased and zashlifovyvayut.
treated with special therapeutic plate machine, adjusting the size and shape.
It is given a special glue to the nail plate is pressed to the troubled spot.

The stretched bracket on the nail does not allow it to grow further, rectifying and correcting growth. To conduct this procedure should only be a master, because at home it is impossible to assess how strong you need to tension and which plate is required. It is recommended to visit a doctor and that he has identified possible solutions to the problem of ingrown nail.

Price range

Correction of nails, the price of which is quite high, can be carried out:

independently;
in the cabin;
from the private master at home.

It should be noted that in the salon treatments are usually the price - just polstoimosti capacity (about 600-1200 rubles for both arms). Private master can make a discount or even spend all free, if still enrolled. Self-correction can be done, but only in compliance with all rules and procedures and capacity, otherwise there is a risk of spoiling their nails to the disgrace. In addition, it is necessary to invest in the tools and instruments that the cost is equal to the procedure in the salon or the master. How do nail correction professionals? Similarly, according to the instructions, in accordance with all regulations.

Output

Depending on what kind of procedure is necessary, it is necessary to consider the possibility of holding it at home. For example, the problematic and complex cases are best left to a professional and easy to deal with on their own. Correction of nails at home without difficulty if you follow the instructions and advice of the masters. Any type of manicure can be done on their own, saving time and money. Naroscheny nails require adjustment once every two or three weeks, depending on how fast your nails grow. At the same time, in the absence of a special apparatus, but to remove the free edge of a butt, if necessary, should still see a wizard that will easily cope with this problem. Nails, which has the disease (it does not matter if they were to build or come after it), you must first cure and only then imposing on them the beauty of lacquer or synthetic material.

Pro Design

If, during the correction of artificial nails is required to change the design, it must be almost completely cut down the thickness. After this simulated first material, which are laid out and decorative elements. It is remarkable that such a nail correction costs several times more expensive than usual, as it combines a triple work: the almost complete removal, then design and modeling. This work ranks higher, it takes longer, but the result exceeds all expectations. Design is recommended to consider in advance. For example, painting is done on an already modeled nails, and interior design - just under the base or topcoat.