Capacity gel nails. gel nail extensions Technology

Modern technologies allow owners of soft, brittle nails to buy beautiful manicure. After all, often to grow the desired length is almost impossible due to the nature of the nail plate, and well-groomed hands have always want. It is in this case, it comes to the aid of artificial nails. It is best to seek help from the master, but you can go and special training (capacity gel nails requires specialized knowledge).

Materials for building

Basically, this technology is used for two types of materials: acrylic and gel. Each of them has its own characteristics. Unlike the acrylic gel is not sharp, unpleasant odor. But in turn, the first material is more resistant to temperature and is itself harder. Acrylic is ideal for all kinds of designs, but the gel is not as versatile use of sequins complicated by its structure. Adhesion better when using a second material to the same capacity gel nails more widely used due to several undoubted advantages. The gel does not cause irritation of the skin around the nail plate in the simulation it looks more natural. It is also important that the material is breathable. experts often recommend buildup gel nails for those who have their rather thin, soft and fragile.

What do I need to have to build the

Capacity gel nails can not be without a number of specific materials and devices. First of all, you need a special lamp, because the gel hardens exclusively under the influence of ultraviolet rays. Another need material itself (base, contouring, finishing coating), means for defatting and disinfection primer (to improve adhesion to the natural nail), tips (they require a special glue) forms various sawing and buffs.

Forms gel

There are several major groups of the material. The first is the gels which harden under the influence of ultraviolet rays. They do not have a sharp odor, their application technique is quite simple. Also, this material is perfectly connected to the natural nail. The gel is applied several balls, each of which is dried in the lamp. However, if you are allergic to sunlight, it is necessary to carry out the test and find out whether the bulb will cause rays of such a state. The second group includes nesvetochuvstvitelnye gels. A feature of these is that they harden after application to the surface of special catalyzing substances. Polymerization occurs due to a chemical reaction, and no influence of ultraviolet. Capacity gel nails using such material implies the use of additional strengthening or silk fiber.

Extensions on the form

Capacity gel nails involves the use of special forms. Before starting the procedure requires a thorough disinfection of hands as the master and the client. Then follows the step of preparation of the nail plate. It is necessary to push back the cuticle, which gives nails the desired shape, and then remove the gloss using a buff. Nail plate should be thoroughly cleaned from dust and grease. After the data manipulation applied primer. Thin layer coated nail base gel and dried in a lamp. Conditions to be observed when applied to nails capacity gel forms - free edge of about 1-2 mm. It is necessary for a good fixation of the form. Using simulated its free edge, as well as the entire nail and is greased. All this needs to be dried in the tube. After the mold is removed, and the master builds needed nail architecture. It is important to form the apex - the highest point. After polymerization, the adhesive layer must be removed. Next, the sawdust and give the necessary form. The nails are almost ready, you can simply cover their finishing gel. And you can vary the capacity of gel nails - french, casting, painting, glitter and rhinestones only decorate manicure. After performing design applied topcoat, dried in the ultraviolet lamp.

gel nail extensions on tips

Many masters use instead forms tips. They can be different sizes, transparent or with a certain shade. Technology gel nail in this case has its own characteristics. The preparatory phase is the same as with the use of forms. This disinfection and cuticle treatment and degreasing. After that there is the selection of TIPS. They must be chosen so that they exactly match the size of the natural nail. In an extreme case, it is better to take a little bit more, but in any case not less. Tips are covered with special glue and glued to the nail. The area that they occupy approximately 1/3 of the entire nail plate. Then it is necessary to process the edge to the boundary between the nail and the Tipsy was invisible. Grinding takes place of the whole structure and degreasing. On the natural nail is applied primer. Then it covered with a gel layer. It is applied 2 times, each of which is carefully dried. Then a finishing nail plate overlaps gel.

Correction of artificial nails

For wearing time (which is 2-3 weeks) of extension natural nail as it grows, bright band appears near the cuticle area. In addition, all sorts of possible detachment of the material. Therefore it is recommended to carry out correction of not less than once every 3 weeks. This procedure takes much less time than the build-up to the same and is cheaper. First of all, the lacquer coating is removed (if any), disinfection, treated cuticle. Then opilivaem regrown natural nail. Also nail file to be processed and the entire coating. If there are defective parts, they must be removed. Clean the surface of dust and degreased. After these manipulations can be applied to the gel and simulate nail. The main purpose of correction during a procedure such as gel nails capacity - minimum traumatization own nail plate and making manicure fresh appearance.