Signal revolver - technical specifications. Signal pistols. Characteristics

As is known, the signal gun is quite different from a firearm. First of all it should be noted that it is not designed for security. The main duties of its creation sound effect belongs. It is used in different situations may have different. Alternatively the signal gun is used to scare away dogs. In this case, it can always help a person in a difficult situation, simply drawing the public's attention with a loud sound.

Mass audience on television quite often encounters this type of gun at sporting events. In this situation, it sends a signal for the start of all participants. Under the current law, to buy a gun can any adult without any permitting documents. In this regard, signal modification is much simpler gas and traumatic weapons.

The important characteristics pistols

The main parameters of the signal revolvers should include a range of a bullet. Also, when this is taken into account the material of which it is made. Unlike firearm accuracy is not important. In addition, the buyer revolver dimensions should be taken into account. By weight, it must also be user-friendly.

Handle revolvers in their form are quite different, but the rubber gasket needs to be present. The last model is considered equipment. For easy transport by the manufacturer, usually given case. Also, the buyer must have a document for the goods, which suggests that the model is a signal and does not require permission.

MR-371 pistol Options

Signal pistol MR 371 has a length of only 143 mm at a height of 105 mm. The total mass of the model in a charged state is 450 Shops in the MR-371 is designed to modify the seven rounds (plus one in the chamber). As a sighting device here has a strap, as well as fly. To regulate them in this modification is impossible. Caliber equal to 6 mm. signal lifting height is 120 m, and the bullet is flying range of 150 m. The handle pistol MR-371 in this case is made of plastic manufacturer. In turn, the barrel is made from a metal alloy. The limiting pressure it can withstand quite large despite a small thickness. Total signal pistol MR 371imeet parts and units 47 pcs. Standard package provides for a carrying case models, as well as documentation for the goods. Additionally, the user can find a brush, which is necessary to clean the barrel after using the gun.

What is interesting revolver LOM-S Company "Zoraki"?

Revolver signal LOM-S has a length of 202 mm and a height of 120 mm. model mass in a charged state is 650, the drum is in this case designed for 8 rounds. As a sighting device used strip and fly without the possibility of adjustment. The range of a bullet is equal to 170 meters. The handle has a rubber lining.

Case y revolver LOM-S made of steel and copper alloy. Limiting pressure it can withstand quite a lot. The rod in this modification is produced in the factory hollow. In connection with this nest under it, it is a hollow sleeve. Start trigger is carried out quite smoothly. The barrel revolver signal has LOM-S-cast type.

The revolver-pistol "Thunder"

Said revolver pistol-mass signal in the charged state has a 550 g at a length of 205 mm. The caliber of this modification is equal to 6 mm. Lift height signal is at around 200 m. revolver handle y-revolver "thunder" at the factory with a rubber lining. The rod in this modification has a hollow. Platoon trigger the device is quite handy.

Fuse in this case blocks the trigger. The barrel of his revolver at the "Thunder" is very thin and has no grooves. Pooled entrance is provided in the form of a truncated cone. The trigger at the gun is equipped with a matchlock. Platoon mechanism is made without the participation of the extractor. Ammunition for the gun "Thunder" are used only with cardboard sleeve.

P-2 Nagant company "Izhmash"

A revolver pistol signal P-2 has a weight of 600 g at a length of 320 mm. The chamber in this case is composed of four cones. Trunk classifies as smooth without a muzzle brake. Revolver P-2 of the company "IZHMASH" bullet has a range of 200 m. Total modification units and parts manufacturer provides 42 pieces. The chamber is at P-2 revolver company "IZHMASH" is made as a hollow sleeve and the rod is located at the end of it. trigger descent is carried out quite smoothly. The housing is produced in the factory of copper alloy and stainless steel as well. Nest under the removable chamber there. To alter the signal revolver melkashku possible.

Revolvers Ecol

Signal revolvers have Ekol barrel size of 130 mm at a total length of 160 mm. The width of this modification is 35 mm and the weight in the charged form is equal to 500 g The sighting device is used as strap. Ecol barrel revolver is made monolithic. Pen manufacturer is always manufactured with rubber gasket. The trigger in this case provided with no blind hole. Range bullet is 170 m. The drum has a signal revolver Ecol cast and the rod in said modification is made hollow. The standard package case is not included.

Specifications revolver MR-313

Signal pistol MR-313 mass in the charged state has a total length of 450 g of said modifications equals 240 mm. Caliber revolver in MR-313 - 9 mm. Lifting height signal is at around 200 meters. The level of noise, this model does not differ from other modifications. Its trunk is classified as all-metal gun. The drum rotates on the rod with a plug. Trigger extractor is not equipped.

The range of a bullet is equal to 210 m. The housing is made of aluminum alloy and steel. Total MR signal revolver 313 units and parts is 43 pcs. The rod is equipped at the end of a small plate, a hollow sleeve located over the opening. The rubber pad on the handle there. Aiming to regulate the fly is not possible. Drummer revolver MR-313 equipped with a fuse. The standard package includes a carrying case not for transportation. Alteration of the signal under revolvers melkashku done by replacing the pin.

The revolver "Smersh RC-1", 5 mm 6

Signal revolver 5, 6 mm equipped with seven bullets. The trunk he is classified as a metal, and has only longitudinal rifling. The hammer is formed of open type and with a latch. The fuse provided in this modification. Start trigger is carried out quite smoothly. The shaft in the turret "Smersh RC-1" is hollow, has a special opening for him. At the end of the lock rests in the dead of the sleeve. The noise level is 200 dB revolver. Pooling entrance is shaped like a truncated cone. The firing mechanism is established with a silicon lock.

Settings revolver "Bluff" 1920

Dimensions signal revolver "bluff" is as follows: length - 204 mm, the height - 109 mm and width - exactly 30 mm. This model weighs in a charged state 700 Total sheep in the revolver "Bluff" is designed for seven 5.6 mm caliber cartridges. Range bullet exactly equal to 200 m, and the height of lift signal is at a level of 180 m. The barrel is made in this case of 120 mm. It is classified as a threaded and has 16 turns.

Housing in revolver "Bluff" is made of alloy steel and copper. In turn, the handle is made with a plastic lining. Rod in the hollow drum type. Special connector for it in the present modification. the hammer is cocked by a fairly comfortable. Blanking plug in "Bluff" model is located at the rear. As a sighting device is used fly. Adjust it in the turret is not possible. Cartridges for the models applied only with a cardboard wad. The barrel is made quite thin, but it is rare to overheat. bullet stabilization is generally good due to the rifling. Muzzle brake in this modification is absent, and the impact mechanism is made without a lock, but in the revolver has a fuse.

Features revolver "Stalker P-1"

Said revolver weight in the discharged state has a height of only 450 g of said modifications equals 130 mm, length 190 mm. Barrel is made directly with the size of 160 mm. The caliber of this model is 5.6 mm. The barrel of a revolver at the "Stalker P-1" is classified as a monolith. Plug in this case he is not equipped, rifling it also absent. In this regard, the range of a bullet is only 150 m. The height of the signal recovery is at 130 m.

In addition, it should be noted that the handle is equipped with a rubber gasket. As the sighting device manufacturer provides strap. To adjust its position in the gun "Stalker P-1" is not possible. Rod at the plant is hollow and can withstand heavy loads. The noise level equals 210 dB revolver. All parts and assemblies it has 45 pieces.

Browse revolver "Flaubert"

This gun has a very compact dimensions: length 160 mm, the height - 130 mm, and the width - 33 mm. Weight models at the same time in a charged state is equal to 650, the drum Capacity - 8 rounds of caliber 5.6 mm. As the sighting device is installed plank. Range of bullets flying is 160 mm and the rise of the signal equals 140 meters. The handle plastic overlay.

The barrel revolver y "Flober" has a total length of 140 mm. It is made of aluminum alloy and steel, and is classified as a cast. Rifling it has a longitudinal, all can count 12 turns. The standard kit includes a carrying case, as well as documentation on the model. Deaf sleeve is located behind the drum. Rod in the revolver, "Flaubert" in accordance with a special hole. trigger descent is carried out quite smoothly. Total of parts and components in this modification has 43 pieces.

Revolver company "Chiapa" caliber of 5.6 mm

Said revolver entire length is 190 mm with a weight of 800 g trunk in this modification is classified as a solid. A special coating prevents corrosion. Cartridges are available as standard with a cardboard wad. Muzzle Brake revolver "Chiapa" caliber of 5.6 mm no. As a sighting device uses a fly that can not be adjusted.

The barrel is made quite thin, but the ultimate pressure can withstand very large. Powder gases do not contribute to heating of the barrel. It should also be noted that bullets stabilization provided by the rifling. Trigger caliber 5.6 mm is set with a silicon lock. In turn, the extractor in the revolver missing.

gun "Luger P-08"

This gun has a length of 145 mm, the height - 120 mm and width - only 15 mm. The total mass of the model in a charged state is equal to 630, the store is exactly Capacity 8 rounds (plus one goes directly into the chamber). signal lifting height is 200 m, and the range of a bullet -. 230 m in the pistol grip is made of plastic. The barrel is an aluminum alloy and steel. The chamber in this case there is a stub. Mounting the store is represented as a Makarov pistol.

Trigger mechanism is equipped with extractor. Pooled input represented frusto hole. Trigger a "Luger P-08" is equipped with a lock. The chamber in this modification is represented by four cones. Signal cartridges included instead of fractions have an asterisk. Covering the trunk burnished, and due to this it is almost not subject to corrosion. It should also be noted that the manufacturer submitted to the store box type. The leading part of the trunk is cut. Due to this, when fired bullet achieves good stabilization.

Gun "Ekol Lady"

This gun has a total length of 160 mm and a height of 120 mm. Spaciousness store is 8 rounds and 1 - in the chamber. As a sighting device acts strap. signal lifting height is 210 m, and the range of a bullet - as much as 250 m in this case the handle has a plastic cover.. The standard kit includes a metal case, the documentation for the goods, as well as the brush for cleaning the barrel.

Mounting the store takes place in Makarov pistol. Cartridges are available as standard with expelling charge. Trigger matchlock not equipped. Cartridge groove in this case, there is a rather voluminous. The chamber consists of four cones, and store in said box-type modification set. The trunk model "Ekol Lady" has a special coating. The sighting device is presented in the form of a pillar, which can not be adjusted. Pooled entrance looks like a truncated cone.

Gun Features "Aras" 5.6 mm

The characteristics of this gun is not much different to the previous modification. The sighting device as it is used in its entirety. Weight model "Aras" 5.6 mm in a charged state is equal to 550, the signal lifting height is at the level of 210 m. The trunk of the gun provides a monolithic type. On the handle there is a plastic overlay. Barrel is made of aluminum alloy and steel.

Total units and parts in this modification has 42 pieces. Closure impactor in "Aras" 5.6 mm is performed by means of a fuse. Shop set a standard box-type, and the button opening it has a corrugated surface. Nest under the removable chamber available. Pooling input - without caps. Covering the trunk burnished, no muzzle brake. Cartridge groove set volume enough. The trigger mechanism is equipped with a security lock. It should also be noted that the firing pin in the "Aras" 5.6 mm mounted monolithic type. Is this flare gun (market price) of approximately $ 120.

Gun "Stalker 918"

This gun features a large noise. This indicator is located at around 210 dB. The chamber in the modification - without a protective sleeve. Pad on the handle there is a rubber manufacturer. Barrel gun "Stalker 918" is classified as all-metal. It is made entirely from steel and copper alloy.

The standard set of cartridges attached caliber of 5.6 mm with a cardboard wad. The sighting device as applied strip. Nest under the removable chamber design provided. Also of note is the dead bolt of the lock. The trigger mechanism is adapted to hammer.