Shotgun TOZ-106: description, specifications, reviews owners

Shotguns TOZ 106 represents a shotgun with a shortened barrel, and a folding butt of metal. Its main purpose is amateur hunting of birds and beasts, as well as self-defense and the protection of individual farms. His sighting range without additional optics is approximately 50 meters. As used charge cartridges 20-gauge to 70-millimeter sleeve and canister.

BRIEF DESCRIPTION

Weighs rifle TOZ-106 two and a half kilos, which, coupled with the compactness makes it very convenient when moving in the highlands and forests. Weapon undemanding maintenance and operation, the length in the folded state is 53 cm, and with folding butt articulated -. 82 cm Recharged model manually bolted through bolt with a rigid lock. Fire a gun can only be in the unfolded state.

The modification is popular among amateur hunters, the trunk can be quickly cleaned using a cleaning rod or cloth. Transportation is carried out in a special carrying case with handle. It is possible to install an optical sight. This gun is perfect for novice shooters, is considered the shortest shotguns, which is available to the population in the Russian Federation.

Modification TOZ-106: Specifications

The following are the main technical parameters considered guns:

charges caliber (mm) - 20;
the length of the barrel / breech (mm) - 260/70;
store capacity (pcs.) - 2/4;
index grouping percentage at a distance to the target 25 meters - not less than 35;
descender unregulated force (N) - from 10 to 25;
the total length / width / height (mm) - 820/70/170;
mass without charge (kg) - 2, 5

The package includes a repeating shotgun TOZ-106, box-cover, additional store MC-2001 and instruction manual with a passport. The shutter mechanism includes the trigger, spring lock striker and the core.

Device

Barrel with a box connected via a press fit with the further detent pin. Its channel is made of chrome-plated metal. As the aiming mechanism serves as a front sight the rear sight. On the metal butt has a rubber recoil pad with the clamp axis. Change of transport and fighting latch mode is placed in the forearm, and an axis in the wedge grooves of the bracket.

TOZ-bed 106 is formed of wood, percussion assembly is positioned in the shutter, and the shutter system is in the housing. Cock can when opening the shutter, is controlled by this operation using the cocking handle which protrudes over the liner or rolls plane. Weapon recharged mechanically by shutter transfers extreme positions. The charge chamber is fixed lugs provided for supporting the core and the housing parts.

When translating shutter mode spent rear sleeve ejected by means of the reflector, and non-automatic safety locks descent in order to avoid accidental shots. Box magazine is equipped with two latches on the sides, fire a gun can only be assembled.

Maintenance

Timely preventive treatment will extend the service life of the weapon. To do this, regularly lubricate the working parts of gun oil. TOZ-106 owners should follow a set of rules, namely:

to avoid a sharp blow on the stem cut when changing the shutter mode;
to avoid empty runs hammer;
in storage pay attention to the fact that the trigger was lowered in order to avoid deformation of the spring;
ensure that the barrel did not get wet, the snow, the earth;
not to use charges, which are included in the tight chamber, which requires more effort for opening and locking arms.

Clean and lubricate the gun is necessary after each use and during storage - at least once a quarter. The barrel and breech handle wire cleaning brush, brush with a special oil. Once the element cleaned, it is wiped dry and lubricated. The wooden parts are treated with a soft dry cloth.

Disassembly and assembly

To begin dismantling weapons TOZ-106 should, ensure beforehand that it is not loaded. To do this, check the absence of a charge in the chamber, remove the store, take the open slide back and pull it out of the box by pressing the trigger until it stops. Complete disassembly of the gate is made in case of emergency.

The process consists of the following steps:

shutter takes on a cylindrical portion of the left hand so that the insert on the right side;
it is rotated until the extension together with the hammer and the hammer from the valve body;
insert the trigger is placed in the right hand while the thumb rests on the back of the trigger element, and the drummer is directed to the left;
second hand holds the base gate, lobes should be directed to the right;
firing pin placed in the core channel until it stops, the projections are arranged parallel to the main spring similar detail shutter;
after compressing the mainspring rotates with the trigger insert at right angles to the housing with the striker lock is removed and additional spring;
in the last step should be to get out of the hammer firing pin, to separate it from the filling of the liner.

Is the gun in reverse order.

Getting Started

Weapons TOZ-106 before using it is necessary to clean the outside of grease residues, lead to the working position by the layout of the stock. Followed by a press magazine catch and remove it from the gun. A further procedure consists of several manipulations:

two cartridges are inserted in the clip, which shifted to the back wall of the store.
shutter bases knob is rotated counter-clockwise until it stops.
Weapons placed on the fuse.
The shutter is retracted, after which the charge is sent into the chamber.
The grip shutter rotates clockwise to failure.
Curb clip is placed into an available slot until it clicks.

Before you shoot, the fuse clip you want to display to the extreme frontal position.

Shooting

To perform a shot from a gun-TOZ 106, the caliber of which is 20 mm, it is required to open the gate, transfer arm in the rear position to get rid of the sleeve, the next chuck hand in these reverse gate movement. After this weapon is considered ready to fire.

After shooting cock the hammer, drill bolt knob counter-clockwise until it stops, to activate the lock. The store is necessary to separate and remove the waste by means of a sleeve valve, put the safety catch in the front position. Then pull the hook at the open gate, and then the last element is closed while holding the trigger, the store is discharged and mounted back on the gun. At the final stage the stock is given to the output axis, rotated and fixed latch. Weapons placed in the holster.

Safety

In any case, the owner has to assume that the gun is loaded and dangerous to others. In any case it is impossible to direct it towards other people or livestock. If there was a flash in the pan, do not open the gate for 180 seconds, as there is a possibility of late volley.

Cartridges TOZ-106 must comply with the characteristics specified by the manufacturer. Keep the gun must be in an uncharged state with the hammer, separate from ammunition. It is strictly forbidden to:

to disassemble a loaded gun;
use charges which are propellant gas pressure index more than 72 megapascals;
alter gun to radically change the trigger and the housing;
to apply delayed or inappropriate for the type of gunpowder.

In the case of a misfire, you must remove the cartridge and three minutes later to find out the cause of the failed shot.

TOZ-106: reviews of the owners

Holders of the considered modification note that the accuracy of the shot shot is a period of high and stable. In addition, high precision is observed at short distances. Charges for guns must be chosen correctly, because the smaller the diameter of the bullet will scratch chrome coating, lead to internal deformation of the barrel, and therein tightly incoming jamming and threatened premature rupture.

model design makes it possible to set the store on four cartridges. The main thing that it was factory production. By shotgun disadvantages relates rigidity shutter retainer is not too convenient girth and delay when fired due to the poor compatibility of the barrel length and caliber bullets. Another problem is the spring from the ATM, which is pretty fast out of order. Nevertheless, compactness, light weight, wide range of applications - factors influencing the positive reputation of the weapons.

Notes

Complete disassembly TOZ-106 should be performed only when absolutely necessary and under appropriate conditions (special weapon shop workshop). When locking the mainspring lock requires caution since in step locking assembly could fly off the impact mechanism and traumatize the owner or employee performing the transaction.

Larva must be inserted with the ejector and the liner, the shutter trigger and should be placed in the frame. To avoid liner failure directions during assembly it should rest against a solid support or a static surface. After the end of manipulation is important to ensure that the outer reflector slots coincide with those elements on the inner and outer parts of the valve body. Correct interaction mechanisms gun is verified by bringing it into the firing position without charges. When properly executed work should sound a click.