Fly fishing tackle for beginners. Fly fishing. Fishing

To some extent from fly-fishing can be considered a classic, as it reflects the process of the basic foundations of the fishing equipment. Throughout most of its existence, this method has experienced a lot of transformation, which, however, did not stop by today to preserve its spirit and aesthetics. Actually, for the professionals and enjoy fly fishing as effective catching big fish, there are many other techniques. The most difficult thing to master this technique - learn the basics, as most of the materials on this topic is devoted to the subtleties of professionals. Knowing what needs to be properly collected Fly tackle for beginners, will and understanding of the nuances of the most catching. But there are a lot of positive moments in fishing using fly fishing - a set of readily available and familiar parts.

The composition of fly fishing tackle for

On how to tackle properly assembled, the success of the entire fishing. It is important not only to choose the right components, but also to link them into a single ensemble. To begin with, it should be parsing the list of elements required for fly fishing. So, the following components will be included in the composition:

• Blank (directly rod). Basis, which is presented to the most requirements for power, strength, length and other qualities.
• Coil. It should be comfortable and functional.
• String. Responsible, although an auxiliary part that connects different elements of which will be for beginners Fly fishing tackle in finished form.
• Undergrowth with bait.

and additional components may be required also. they may interfere with, but some idea of ​​this area should be novice anglers. In particular, it can be connectors, hooks, floats and leashes. They simplify the task of the fisherman, but require skillful handling.

Selection of the rod

For inexperienced hands, it is desirable to prefer a rod of moderate hardness. Understand this characteristic help classes stiffness. Fly fishing for the first stage of the model should be used 6-7 class. Rigidity such form will be sufficient to work with a fish weighing from 200 g to 4 kg. Too stiff rod should not be used for a variety of reasons. First, tackle for fly fishing moderate softness enable sharper feel the cord when casting, and secondly, the big fish in vyvazhivaniya can break a thin leash.

Also, when choosing a rod should take into account the amount of the knees - it varies from 2 to 4. Dvuhkolennye model stronger and rods with a large number of compounds, respectively, are not as reliable, although increasing distance casting. the form itself, from which the Fly fishing tackle can be made for beginners, made of different materials. The most demanded fiberglass, bamboo and carbon fiber. If funds permit, it is better to choose the model of carbon fiber, which have an optimal ratio of strength and flexibility.

The selection and adjustment of the spool

For fly fishing should be considered three options for the coils: normal, automatic and the multiplier. The first time is worth to try fishing with conventional models, and then move on to more complicated version. But it is important that the coil was equipped with an adjustable brake. With this accessory tackle Fly fishing for beginners will make the process efficient and convenient. The rest of the special requirements of the coil there, but it is recommended to have a leskoderzhatel, without which it would have to form a cord-the backing. Many low-end models do not have this opportunity, so you should take into account this nuance.

fly line

Acquire cord preferably with a rod - it is important that these two components fit together. So if purchased Form 6 class, and the cord must comply with it. It should be understood that in this case reflects the mass class, which stands on the first wiring 10 m. Thus, the class of 7 corresponds to a weight of 12 g corresponding to the weight of a small spinners. Especially for beginners Fly fishing tackle should not have the rod and cord, which differ in their labeling. The fact that a weak cord does not provide sufficient sensitivity, and too heavy will create the risk of breakage of the form.

There are two criteria for the choice of this element - buoyancy and color. Beginners are recommended floating cords as they are easier to cast. And the color is necessary to stop the choice on light versions - such as fly fishing with a white cord and provide a masking effect, which is important when fishing for some types of predators.

Leash undergrowth or

In the undergrowth fly fishing line can act as a small diameter. Inexperienced anglers desirable to employ embodiments of tapered 0, 2-0, 5 mm. The thick end of the further need to be tied to a string, and thin - to the sights. The length of the leash is approximately 2 to 6 m. In case of discrepancy between this parameter and the line length must be shortened form. To fishing gear could be used in strong winds, are kindly requested to make a short undergrowth. But, as the line to adjust the same size under different conditions does not work, should initially have a few options of different diameters.

Installation of gear

The assembly process for the most part of the gear provides binding sites, but before that should perform the backing. It is a lining for winding the cord on the reel. In response to a question about how to build a fly-tackle with the right Buckingham, it should be noted the importance of the calculation of its length. Typically, these data are obtained from the markings on the reels. But there is another way to see this option. To do this, wind the cord on the reel, and then carry out the backing. You can stop at the moment when the left edge to about 5 mm. Next, the winding is done in reverse order.

The availability leskoderzhatelya in the coil also depends on what will be the installation of fly fishing tackle with drawstring. Actually, the backing-string technique and is performed in cases where there is no drum in this supplement. Initially the backing itself may seem unnecessary, but in the process of catching a big fish, he will act as a pre-roll mitigation.

for fly fishing nodes

When the backing is made, it is necessary to put all the ingredients in a prominent place, preparing the clippers or scissors. This tool is required when working with nodes to trim the surplus. There are many schemes, which are formed components for fly tackle, but if you plan to catch a big fish, it makes sense at all without them acquiring node-free leash. For the self-mating commonly used scheme "Arbor", which is as follows:

• At the end of Buckingham fit a normal node, and then tightened firmly.
• The cord extends through the coil so that its end with the initial node is at the bottom of the spool.
• This is the end of the backing is wrapped with a standard unit.
• The new node also greatly delayed, like the first, and then you need to make a loop on the spool, sipping a second-Buckingham.

Flies for fly fishing

Work with the best overlap with wet and dry flies. In terms of sizes most useful number from 3 to 6. Too small types of baits than 3 rooms should be excluded immediately. To experience the throw, fly and do not need. You can restrict the use of a cotton swab. This is especially important for the reason that the flies are worn for a short time of use. Accordingly, if the fishing gear provided with a bait, then immediately after the application it is necessary to dry. The specific approach is needed to the feathers to be spread with forceps and in hot water. If you can, it does not hurt to treat them with steam. In order not to spoil the fly fishing for the first time, it is better to acquire high-quality models in a line of universal - they are the most resistant to different fishing conditions.

fly fishing technique

The first impression of the finished gear for fly fishing may not be the best. The elements seem unsuited to each other, and the rod is inconvenient to use. But this is the first time until the angler has not mastered the technique by which you are fly fishing with Buckingham. To begin its study should be a casting. To do this, grip the handle is made with fixing the cord in his left hand. Next, the characteristic movements of the rod are made back and forth so that the cord is maneuvered in the air. In parallel with this action takes place and tightening. The meaning of the Range is that they will make possible long-range shot.