How to make a leash for fishing with your hands?

What is bypass leash and what is it for? only an avid fisherman can answer these questions. Now this type of installation, as a bypass leash is very popular among fishing enthusiasts fish. These include feeder, spinning and conventional fishing rod.

The popularity of using the discharge tackle increased only when there was an idea from one breeding bait and other cargo, allowing less to scare the fish. This is a type of cargo. This type of equipment can be used while hunting for prey fish or fishing, for example, carp. How to make a bypass leash?

When and where to use the diverter tackle?

Most of the gear has a bypass leash. This type of installation is used for fishing at any time of the year. Therefore it is necessary to list the ways of rigging and fishing, which uses a bypass leash.

1. Fishing with spinning, when the branch can be called the leash snap Moscow.
2. In the feeder. It uses a helicopter to build a lead.
3. Fishing in the wiring when the fishing is hampered by the fact that the river is fast flowing and rocky bottom.
4. Winter fishing. You can use the lead in building a "helicopter" or a big load to accelerate the catching process.
5. When trolling, when the bait must be placed above the grass. In this case, you can use tap leash and at great depths.

The advantages of using

When using tap the leash you can eliminate the possibility of losing the bait: if fishing is carried out in the cluttered pond area, the better to buy a cargo of elongated shape, similar to a stick, which will pass through the narrow gap without problems. It is also possible the use of lead pellets, which must attach to the tip of the fishing line. In addition to the loss of gear, the discharge leash is useful in the case of the free play of the bait, that is, it does not get to the bottom and move up close.

Make a leash at home is easy, moreover, it is ideal for deep fishing and for catching fish in shallow water, with rapid and slow course. It is important to take into account the depth of the reservoir and the bottom relief at the design installation, and then fishing will be pleased.

Variations

Diverter leash has become popular due to the fact that during the fishing person can feel the whole dynamic of the game fish luring her.

Before you look for an answer to a question about how to make yourself a leash, you must remember that fishing is carried out in such a position when the rod is positioned vertically, making it easy to lift the load.

There are two basic types of mounting structures - deaf and sliding. To understand the difference between them is necessary to describe in detail each type.

Deaf installation

For fishing is the most popular binding triple swivel, when the tip of the main cable is secured tightly and the other end moves freely. By the fixed part is fixed sinker, and the free end - bait. Through this swivel makes unrestricted movement of the sliding, the entire length of fishing line. If desired, the fishing line can be attached to the rubber stopper.

It is also possible to use a special wire removal, which is shaped like the letter "g". It is tied just above the sinker on the main cable. It should be noted that the main advantage of this design of the installation is that the lack of hooks and storage easier. Here we answer the question of how to make the lead a dull way.

The sliding assembly of

Dual swivel - a popular type of weaving. The main material for this construction is the main fishing line. Sinker attached to the line length of 30 cm, and more specifically to a single lug. On the other hand on the rope attached to one and a half meters bait. In this case, the cable length should not be less than the length of the leash with a load.

When the sliding swivel assembly will move across the length of the cord, and serves as a limiter design with bait.

Installation Instructions

Mounting tap leash held delicately and, of course, careful to avoid damage to equipment. How to make a leash correctly? To do this, you need to follow knitting technology which is as follows:

1. Prepare a couple of rifles and a sinker, whose weight must not be less than 10 grams. It is better to choose sinker cylindrical silicone leash with the fishing line to 0, 5 mm.
2. Then skip the basic end of the fishing line through the eye of a swivel, so that it glides on the rope.
3. The free threading the eye of a swivel sinker line and skip through it. The length of the line should not be more than 30 cm.
4. tighten the tip of fishing line with a triple assembly to form a loop, necessary for connection with the swivel sinker.
5. In the hands take swivel located on the main line, and to the free eyelet fasten the leash (on hook).

The criteria for selecting lures

The efficiency of fishing depends not only on how to make the lead from fishing line, but also the choice of bait.

Twisters selected fishermen who prefer bypass leash. Twister used as a lure for spinning. The main distinctive moment of twisters is that this natural bait behaves in water and like a live fish.

Now highly relevant so-called soft plastic bait. Most often used when fishing for a bottom rig.

Blosna used for mounting tap the leash is much less than other baits. All due to the fact that together with the spoon and set a heavy load.

Floating suspender, such as wobblers, are not used as often. They look like twisters are not suitable for deep sea fishing.

It is not enough to know the answer to a question about how to make a leash with your hands, it is important to choose the right bait and packaging to the structure itself.