Bream on the ring: and snap bait

Fishing for bream was and remains a pastime for experienced anglers. Catch the fish can only be well aware of its habits, habitat, as well as having a gear adapted under certain conditions. It often happens that the fishermen with the most modern devices and equipment go to the pond with nothing, while ordinary boy on an old boat with a makeshift fishing pole in his hand continues to drag bream one after the other. What is the secret?

There are types of fishing, which is still our ancestors hunted their own food, and are not only not lost their relevance today, but on the contrary, are becoming increasingly popular. One is bream onto the ring. On it, we'll talk.

The essence of fishing on the ring

Fishing tackle using this calculated solely on the catch on with running water reservoirs. The most common bream on the ring on the Volga and the Don, although it is believed that this type of fishing has come to us from Italy.

The main element of the set, as though it may sound silly, a feeder, not the ring itself. It - is only an auxiliary member for holding the display.

What is the bream on the ring? Rybak comes up on the boat to a specific location where the flow takes place perpendicular to anchor and several weights (anchors) from the side on which the water flow is directed. On the opposite side to the strong cord, is threaded through a metal ring on the bottom of the trough is lowered large. Through this same ring and is passed the main line with snap.

During the washes away from the trough small particles of bait and carries them further, which attracts fish, which is inferior to the place of fishing. Tooling also demolished the water flow a little farther away from the trough. Thus, the fish, attracted by the bait, going against the tide and come across our bait. When biting enough angler hook in their catch, and if he did not even have time to make it ring, due to its weight, will allow to carry out samopodsechku bream.

What is in gear

Now let's look at what exactly is this unique design fishing. Tackle for bream onto the ring consists of the following elements:

• board a fishing rod with a nod;
• reliable coil;
• the main line;
• casing with one or more hooks;
• cord to the trough;
• feeder;
• ring.

rod

Onboard fishing tackle can be purchased at any fishing store. Bream onto the ring involves using a short (60 cm) rod type spinning. Also it can be manufactured independently of the upper knee good new telescopic rod, equipping it bandwidths rings and a handle made of neoprene or cork.

In addition, at the end of our improvised trip rod will need to secure the nod. This may be either a homemade embodiment and purchase cock used for winter fishing.

coil

Coil any suit, whether it is the inertia or fast-response, as long as it can provide the landing of fish, without disruption of the process. By the way, catching bream on a ring with a boat can be carried out without the use of a coil. Many anglers who practice this type of fishing, and is cut down, and vyvazhivayut fish at all without it.

The main fishing line

As the main fishing line is common to use a monofilament thickness of 0, 2-0, 4 mm. the cross section is selected on the basis of the size and weight of the intended catch. If you are going to hunt the white bream weighing up to 300g, meaning to use the line thickness of 0, 2 mm no. But if to be fishing for large specimens, 0, 4 mm will be just right. Bream onto the ring is usually carried out in deep water, so the length of fishing line to be calculated from the maximum depth of the pond with a margin of about 5 m and the same length reserve in case of breakage. In any case, the minimum number of yarns should be 20 m.

bream on the Ring: snap

Attachments can be of two types:

• one leash with one hook attached to the swivel through the main line;
• a few leashes with hooks, bound directly to the ring.

Let us consider both options. In the first case, a thickness leash 0, 15-0, 25 mm and a length of 0, 5-1, 5 m. The stronger the current, the shorter should be the leash. Otherwise, it is either confused, or for something hooked.

Fishing using multiple leash - is a classic bream onto the ring. Attachments here consists of 2-5 monofilament segments of the same thickness, which in a conventional manner are attached to the circumference.

cord to the trough

There are no special requirements to the cord does not. The main thing is that it is durable, long enough, as well as solid and smooth. The latter requirement is necessary to ring freely slid thereon and freely reached the required depth of immersion. Most often used for this purpose nylon or nylon cord, but it is quite suitable and conventional clothesline.

feeder

Bream onto the ring is carried out using a large trough. It can be either purchased or homemade. For fast flow fishermen used ordinary plastic bottle with a wide neck and screw cap. The vessel walls are made of the desired hole diameter (5 to 25 mm). When the low-intensity water stream can be used nylon mesh of shopping bag or netting for vegetables.

ring

That's turn came to the ring. This element has a plurality of gear design options. Classical ring is poured out of the lead. External diameter is typically 40-50 mm, inner - 25-30 mm. The circle is made oblique propyl in order to be able to remove it from the cord. Additionally ring drilled hole through which the main fishing line will be put. Here, in principle, and all the classic design.

bream on a ring with a boat can be carried out on an improved model, referred to as "eggs". "Eggs" - a V-shaped spring, like a safety pin, the ends of which lead balls attached. This design allows the angler to carry out better sweeps: with a sharp snatch fishing line extends between the spring-loaded balls and released, giving opportunity for the fisherman required maneuver.

Successful fishing of bream in the ring: how to fill the feeder and the

Fishing success largely depends on what and how to lure fish. In this form of fishing as fishing of bream in the ring, bait plays a huge role. It should not only impart flavor, but also to attract visually. Not so long ago for bream fishing with rings anglers have used the usual large crackers, which were placed in a grid, and sink to the bottom. Today, you can buy any bait for any fish, including bream for.

Some fishermen prefer to make their own groundbait mix. Recipes for each is different, but their composition is always included cooked grains (corn, wheat), as well as substances that can create a "loop", such as semolina or flour.

Feeder ogruzhennoy have to be, otherwise it will be demolished. For ogruzki lead washer is used the right size and weight. When using plastic containers from the feeder bait tightly stuffed into the bottle. Fast water flow will gradually wash mixture particles, carrying them downstream. For low-intensity currents bait is formed into balls and placed in a mesh bag.

fishing technique in the ring

After fixation, the boat in the right place by a cord feeder sinks to the bottom and is located just below the bead. Next, in the cord through propyl worn ring with its circumference passed through the main fishing line. Is pushed on the hook bait. The coil is removed from the brake, and a snap ring is slowly lowered to the bottom. It is desirable that the ring has laid down exactly on the feeder or very close to it. In this case, the probability of trapping significantly reduced. When the ring reaches its lowest point, a nod in the rod must be straightened. This is a signal to the fact that the fishing started.

When biting do sweeps and vyvazhivayte catch using a coil or manually.

A few tips

1. In the manufacture of self-rings pay sufficient attention to his grinding work surface. Otherwise, it will engage the cord.

2. In preparing the bait, guided by the seasons. In the spring and autumn in the mixture it is desirable to add the ingredients of animal origin grubs, worm crank, Trichoptera and others.

3. When choosing a place of fishing, and avoid zakoryazhennyh areas, or hooks and breaks can not be avoided.