What is it - snap Texas? Fishing the Texas rig

Fishermen spinnings are now increasingly prefer to use tackle, called in their circles "snap Texas." Such a title she won because she successfully used the fishermen from Texas at the American bass fishing. Because of this peculiar gear and excellent catching efficiency nezatseplyaemost, it has gained immense popularity among our fishermen. In Russia snap Texas is now successfully used for pike, walleye, perch and ide.

What is the Texas rigging?

The design of this gear is very simple. It consists of a scaffold to which is attached an offset hook with silicone bait (worms), and sliding along it sinkers, bullet. Between these two basic elements - a hook and a sinker - located special bead.

The undisputed advantage of this equipment is its incredible "permeability". It's a safe bet when fishing in zakoryazhennyh and overgrown ponds. These places are usually powerless to tackle, and Texas rigging gives excellent results. And due to the fact that the weight of the load can be changed, there is a possibility for fishing on literally all of the reservoir levels.

The main elements of a snap

As mentioned above, these include the sinkers, hooks and lures silicone. Let us consider each of them.

Hooks are used only to offset. Hook size every fisherman chooses at its discretion, based on the estimated production of sizes and types of bait. But experience shows that the best option is considered to be a large hook, which has a curved hooking large.

Sinkers used bullet shaped. Behind them is required to have a special notch, like a cap that covers the bait's head, or a bead. It is this streamlined shape and gives the whole snap incredible "permeability" between snags, thick bushes and other obstacles. The material from which the sinkers, may be different - lead, brass, steel or tungsten. By the way, many are skeptical of the factory weights and cast their own. But in any case, the weight of "bullets" should be in the range of 3-12

Silicon lure for classic Texas-rigging is a worm, but our fishermen except it is used, and species such as twister, octopus and elongated soft plastic bait. The main thing - to choose a rounded shape, which will make it possible to avoid snags. baits size depends on the size of the production and its activity. As for color, it is a standard: for night fishing - dark, for the day - light, and for fishing in troubled waters - bright.

Auxiliary equipment item

Such an element is considered bead located between a hook and a sinker. The thing is that some fishermen do not use it, although it plays an important role. On the one hand, the bead does not beat about the cargo hook, and on the other - during the jerk she hits the sinker, making a click, which attracts the attention of mining.

How to make a Texas rig?

If the basis is the classic Texas rigging, assembling it consists of a series of stringing the line on several elements - Georgia-bullets, beads, and silicone rubber blanket hook bait (worms).

Particular attention should be paid to mounting the hook silicone worm. Better to do it in several steps:

• you must first hook to pierce the worm's head and output sting to 5 mm;
• then the hook is pulled through the lure body, whereupon the worm rotates and the hook is pulled over the step;
• in the completion of bait treatments pierced again (across) the sting out output, but to ensure that it is a snug fit to the body of the worm.

Subtleties mounting Texas snap

Now, many fishermen are replacing classical elements, thereby improving the Texas rigging. Installation takes place in the same way, but traditional offset hook is replaced by species such as Sickle Hook and Wide Gap.

Instead of sinkers in the form of bullets used cone, olive or any other kind of streamlined shape. As a bait used not only six inch worm, but lychee, twisters, slugs or edible tires (dzhavastik). In addition, the bead is often not used at all. Some in its place set tubing or rubber stopper. For the beads given to only one role - to prevent the beating of Georgia on the knot on the hook.

Texas rigging with their hands quite uncomplicated to perform and cope with such a task everyone can, it requires only a little training.

Improvised sinker-ball

As mentioned above, in contrast to other types of equipment Texas is much better behaved in the difficult areas of reservoirs. But other than that the fish bite at the time it perceives as a more natural. This is due to the fact that the fish, which has taken the bait, did not feel the weight of the cargo, which is at this moment on the fishing line slides down. And it is a guarantee that the number of empty strikes will be minimal, and fishing - more effective. That is why those who want to make their own such a device for catching as the Texas rigging, making Georgia is an important moment.

To make it, take a few pieces of "olives" made of brass or lead, having different weight. It should also be reserved drills with a diameter of 6-10 mm. The workpiece to be sawn in half and the back part of her drill make a hole.

to Texas rig fishing technique

Texas rigging is very simple in its construction, which is responsible for the ease and convenience of the fishing process. Just keep in mind that this method is not used for long casts. It is designed to catch fish in the thickets of sedge and grass, among a large number of algae, lilies and water lilies, in places where there are many snags.

Fishing the Texas rig, as a rule, it is of three types:

1. Classical wiring. After taking a cast, the rod is lifted slightly and held in position "2:00" to allow the bait to stand upright on the bottom, and a fisherman - to control the line. After waiting a few seconds, the rod again gently raised in the "1 Hour", and then lowered into position "3 o'clock". Such movement is repeated until, until the fish begins to bite. Bite is immediately palpable (bump or push).
2. Aggressive wiring. In this case, the fisherman does throw a little waiting and produces carpal jerk. After the bait reaches the bottom, it is necessary to wait a few seconds, then podmotat line and make a sharp wrist jerk again. Repeat this movement before the bite.
3. Passive wiring is the simplest. Make a throw, giving the opportunity to the bait fall to the bottom, and wait for the start biting, occasionally shaking the rod.

How to catch pike on a Texas rig?

Immediately it should be noted that the Texas rigging for pike, which is the owner of sharp teeth, to be different from its classical version. After all, it was originally intended for catching largemouth bass.

Experienced anglers know that pike hiding in the thickets and snags. Therefore, for its fishing, especially large specimens, they prefer to mount the sinker-shot on a metal leash. Excellent for making it suitable guitar string diameter 0, 013-0, 014 inches. Sinker threaded on string segment 25-30 cm long, and then made standard twist disposed on both sides of this segment of the leash. The design of this gets a little complicated, but significantly strengthens tackle.

Particular attention should be paid to the selection of hooks. High strength - this is their main characteristic. Texas rigging for pike must be attached to the main line without the use of various fasteners, karabinchikov. As practice shows, it is because of them breaks a big fish. Yes, and in the bush with driftwood unnecessary elements in a snap, too, are not needed. That's why a good option is considered to be the installation of weights on a small piece of string with a twist.

You should know that the pike perfectly respond to volume, ribbed baits such as twister tailed.

For catching this predator is more suitable aggressive wiring. And it runs thus: alternate carpal sharp jerks and prolonged stop, which allows snap slowly sink to the bottom.

Spinning with a Texas rig

Spinning used for catching predatory fish on a variety of artificial lures. It is a rod with a reel on which fishing line is wound.

Those who tuned in to catch pike, can only properly equip spinning. Texas rigging for this fits best. It is attached to the main line, using vertlyuzhek with clasp.

The very same casing consists of a sliding sinker, bullet, which is attached to the leash with durable hard rubber blanket crochet. Between the sinker and the leash is placed a bead, and the hook is pushed silicone bait.

If you're just going to try this snap-in, you know that nothing difficult in it. After listening to our recommendations and use them in practice, you will quickly learn this lesson and can easily make your own Texas rig. I need a little exercise, and you'll get the real pleasure of fishing, who came up with the Texas Rangers.