Tinkerbell costume for girls with their hands

What kid does not dream to get her wand at least for a few hours and to fulfill their dreams come true? Perhaps that is why the costumes of fairies and wizards are most often found in children's matinees. Not so important, that the festival is not magic wands, but suits very real - airy, decorated with sequins and stunningly beautiful. So if you're a mom a little princess, let her touch the fairy tale, dress up in costume fairy Tinker Bell, made with her own hands. Traditional costume of this character consists of a fluffy skirt or dress, magic wand and wings. Your child will no doubt remain in awe of this transformation!

Tinkerbell costume for girls with their hands

Costume fairy Tinkerbell for girls

The funny friend Peter Pan forest fairy Tinker Bell - is incredibly romantic and gentle way, which is quite difficult to be attributed to the New Year's banal heroes. To create a costume require a minimal amount of time and money. There are many dress options, we also consider two very simple ways that do not require sewing skills.

tulle skirt

For the manufacture of the lower part of the suit is required:

  1. Tulle tulle or green (you can take the other colors, combining different shades, but do not forget that Tinkerbell - the fairy forest, not flowers).
  2. Shirt green (other colors can be selected for a multi-colored skirt).
  3. Wide gum.
  4. tape.
  5. Scissors.
  6. A piece of cardboard.
  7. Threads with a needle.
  8. Artificial flowers (you can do it yourself).
  9. Felt.
  10. Hot glue.
Tinkerbell costume for girls with their hands

Making skirt

From the skirt suit Tinker Bell is as follows:

  1. Measure and cut the girl's waist elastic band of this size.
  2. Sew the ends.
  3. Cut of tulle about 50 ribbons (quantity determined by the density and volume of the skirt waist). To determine the length of the tape, measure the distance from the waist to the desired point - to the knee or to the floor - and multiply it by 2
  4. For the convenience of the ready pull the gum back in his chair or on a piece of cardboard.
  5. tape is folded in half and insert it under the rubber band.
  6. A free mid-stretch the belt ends, forming a sort of knot.
  7. Take the next tape and try again.
  8. Fix all pieces of tulle with elastic along the same lines.

When the skirt is ready, mask gum bright ribbon in the form of a belt.

A wreath on the head of

Fantastic fairy is difficult to imagine without the wreath so the following attributes of the New Year costume Tinkerbell is a decoration on the head.

  1. From cardboard cut strip width of about 7 cm and a length equal to the circumference of the child's head.
  2. obkleyte detail felt.
  3. The ends of the strips of glue to each other in such a way as to get the hoop.
  4. Take the artificial flowers and cut the stems.
  5. Use glue lock buds across the surface of the rim.

The wreath is ready!

T-shirt can also be decorated with artificial flowers or other decorations of your choice. Costume fairy Tinkerbell do not forget to complement the magic wand and wings of the manufacturing process which will be discussed below.

Tinkerbell costume for girls with their hands

How to sew a costume fairies?

You do not know how to make a costume fairy Tinker Bell with your hands? This version of the dress consists of several main components, namely a magnificent flying skirts, vests and boleros that will be very useful, since the bulk of Christmas events held in large, cool place.

Costume Making Tinkerbell should start from the top, that is, with T-shirts. Cloth Stretch fit any, for example, supplex. So, let's begin:

  1. Take any child's T-shirt, attach to the fabric, and cut out the circle, it will be the foundation.
  2. Sew shoulder and side.
  3. Treat neck shirts and armhole facings, its length should be slightly smaller than the processed edge. Width piping about 2 cm.
  4. Sew all seams on the machine knitting stitch, treat overlock edge. The face of the stitching should be done so as not to gut-wrenching inlay.
  5. Fold the lower part of the T-shirts by about 1 cm and hem knitted or zigzag manner.
  6. Decorate neck sequins, crystals or stones.
Tinkerbell costume for girls with their hands

Production skirts

Sew skirts suit Tinker Bell should take the easy green material such as chiffon or voile. The product consists of three layers, each of which is longer than the previous 6 cm hem skirt is made in the form of "teeth".

  1. Take a cloth and a half meters in width and set the pattern on it or trace any skirt. Do not forget what you should have three pieces of different lengths.
  2. Put all three layers on top of each other and sew the side seam.
  3. Treat waistline on overlock or zigzag.
  4. Tuck the top edge of about 2 cm inward, forming kuliske for threading elastic bands.
  5. Treat edge "teeth" on the hem piping, it will give the skirt splendor and ease. Done!

sew Bolero

As noted above, many Christmas events is cool, so bolero will not only part of the costume Tinkerbell for girls, but also warms it. Sew the top and backing capes use gabardine green shade, and warm the product can be a thin layer of padding polyester.

  1. Take the same T-shirt, which is used to manufacture the upper part outfit, it circle on the fabric in duplicate (front side and the lining), adding at the edges approximately 2 cm. The length of the article may be any at your discretion.
  2. Draw and cut out sleeves.
  3. quilted synthetic padding front of the product.
  4. Process shoulder seams and sew sleeves.
  5. Try the product and, if necessary, correct shortcomings.
  6. Connect the front side of the bolero with lining, sew around the perimeter of the product on the machine, leaving a small portion of the untreated (so you can turn the product).
  7. Remove the product.
  8. Bolero Garnish with rhinestones and sequins. Done!
Tinkerbell costume for girls with their hands

Step by step instructions for the manufacture of wings

None fairy fairy does not happen without wings, so they are an essential attribute of a suit Tinker Bell. The wings can not only buy in the store, but also to make their own hands. This will not only save money, but also to spend time with your child fun, involving him in the process. For the manufacture of the wings you need the following materials:

  1. Ready template.
  2. Tapes made of satin.
  3. The tulle fabric with sequins.
  4. Pink cardboard.
  5. Artificial Flower.
  6. A piece of felt.
  7. Scissors.
  8. Glue.

process of making

In order to make their own wings to suit Tinkerbell for girls, perform the following steps:

  1. On paper, draw a template of the future product.
  2. Move image on pink cardboard in two copies, it is the basis of the product. Cut out the pattern.
  3. Take a piece of felt and glue it to the wings.
  4. At a distance of 3-4 cm from the middle to make every element of the slots for tapes. Thread the ribbon through them from the atlas, it will be for putting the strap.
  5. of shiny tulle make a bow and attach it in the middle so that a piece of felt was hidden underneath.
  6. In the bow stick artificial flower.
Tinkerbell costume for girls with their hands

Hard wings to the frame

Let us consider another option for New Year's costume wings fairy Tinker Bell, it is a more light and airy. required for the manufacture of:

  1. The thick wire.
  2. Nylon stockings.
  3. Pieces of thick fabric.
  4. paints and glitter to decorate.

manufacturing process is as follows:

  1. Take the wire and shape of her skeleton fairy wings desired shape. Lots docking fasten with tape.
  2. Make the second wing.
  3. Connect the two elements together by means of adhesive tape.
  4. Obtyanite every detail tights of any color. The cloth should be stretched smoothly, without sagging and wrinkling.
  5. Acrylic paint, draw patterns on the canvas and decorate them with glitter. Dry drawing.
  6. Mount. Take a long piece of thick material and fold it into the shape of an infinity sign. Connection Center "Group of Eight" secure with adhesive tape on the joint portion of the wing. Done!
Tinkerbell costume for girls with their hands

Magic Wand

As our fairy Tinker Bell is a fairy-tale character, then it will certainly need a magic wand. To make a magic wand, you must:

  1. Take two pieces of felt material in the form of a star.
  2. To add volume, connect them and stuff them into the cotton or padding polyester.
  3. Lock resulting on a wooden stick element using hot glue. Wand can advance decorate ribbon and sequins, or simply paint the paint.
  4. Garnish with star sequins or stones, and attach to the bottom of the tape, or New Year's rain.

The girl in the fairy image on any holiday will look pathetic. A well thought out costume, made by hand in a couple with a child, can be a real masterpiece.