How to ship float: step by step instructions and recommendations

Many anglers began his career with the usual fishing rod with a float from goose feather. Undoubtedly, this gives way to catch some experience, but it does not make you a professional angler. Fishing with this fishing rod on a professional float immediately put everything in its place. Before you go on a body of water, consult a professional fisherman or read a few articles on how to properly ship float.

How to choose the float and the line

Before we take up the study of the question of how to properly ship float, you need to make the right choice of line and float. Modern fishing stores offer a huge assortment of floats. Some of them are professional poplavochniki dismantled immediately, and some do not even look. What is the reason? After their appearance about the same, and the prices are not much different.

Floats are different in material, shape and responsiveness to bite. Immediately note, if bubochka antenke to float there, if present, do not hesitate to pass by and do not even look in that direction.

If floats more or less, it became clear that there is a question about the choice of line. Many beginners tend to choose strong fishing line. For some reason, many believe that the line quality is determined by its thickness. It's not like that at all. If you are going on an ordinary pond for carp or small pike, fishing line is 0, 14-0, 16 mm, you will be quite enough. There is a concept - a "memory" of fishing line. This means that the unwinding of the coil is a good fishing line remains flat, and the bad will be unwound and maintain the shape of the ring.

How to choose a good float

Before you learn how to properly ship float on a fishing rod, you need to learn how to choose the best float. So, make your fishing brought you pleasure and a good catch, if you select a float, consider the following requirements to be met by a good float:

• You should easily notice it in all the thickets and water background.
• It is necessary to pick up the float by the type of body of water in which you are going to fish.
• Make sure that the tackle is quite reliable.
• A good float always has excellent sensitivity even at very little bite.
• Installation should not cause any difficulties even for a beginner.
• The float must not inflict a serious blow to your wallet.

It is also worth noting that the float depends on what water you are going to fish, how far it was planning to swim or throwing, on your style of mounting the float, and many other factors.

There is a certain set of rules, which amounted to a professional angler that will teach you to choose a good float:

1. If you are fishing on a river or pond, where there is a current, then choose float with big body in the form of droplets.
2. If the water in your pond standing, then you will approach a narrow float, which resembles a goose.
3. From the carrying capacity of the float depends tenderness tackle. The lower capacity, the tenderer will tackle.
4. Pay attention to the material from which made the float antenna. Further, it will affect the way ogruzki.
5. The length of the keel is also important. The keel is longer, the more stable float on water (keel - a lower antenna which is under water).
6. If you like night fishing, choose float with such an antenna, which can be put on the luminous device.
7. Casting long distance is best done with the floats, which have a long antenna.
8. Do not save. It is better to buy several floats of different shapes. Thus, you will be able to experience on their own experience and choose the type that suits you.

Do not be afraid to try something new, to learn from other people to make their own mistakes and gain experience. In the future, all that is useful to you.

The concept of the right ogruzki

As ogruzit float? Proper ogruzka means that the fisherman has to choose the right and mount a lead weight, which depends on how informative the float will operate. To be more understandable language, using this sinker float is immersed in water up to the level which is necessary for its proper operation.

Please note that the float should not be immersed in water completely, but also much to look out of the water, too, can not. More specifically, the rules of correct shipment float say that the float body must be immersed under the water, but its antenna must always be above the water surface. Do not forget that in this case it is important to take into account the weight of the bait and hook.

Professional fishermen have discovered the secret of how to verify the correct shipped float. It is enough to snap your fingers lightly on the protruding antenna. If the float immediately fly back, then ogruzka done right, and if it starts to rotate slowly, it means its overload.

How to achieve the correct immersion

As the ship float for fishing and do not make mistakes? This question is asked every beginner angler. To do everything correctly, you need to choose the right weight and distribute it on the line so that the information content of the float was the highest. Those for whom fishing - it's not just your favorite activity, but also the sport for a long time have got lots of different floats that they can change as needed. But pick up the goods directly in nature is very difficult, so it is better to do at home. Now, there are even special devices that help in selection of weight at home.

What the device

How to ship float in the home? To do this, invented a special device, which allows the selection of the weight of the pellets and without troublesome clinging weights on the fishing line. If you are using a large number of pellets, then such a device will be indispensable for you. In general, most look for different things that will make your life easier and help you save some time.

Shipment float for long casts

Fisherman who practices long casts, use at the same time a large number of fishing line. Its length is always greater than the length of the rod. You can do this only when you have the coil and selected special floats, designed for long distance casting.

These floats can be easily distinguished by their appearance. Their center of gravity is shifted downward, and the antenna a little elongated. Sometimes an antenna length is forty centimeters. All this is done to ensure that when casting the float pulled to a fishing line and prevents tangling. And such a length of the antenna is needed in order that the float could be seen from afar.

Now you can return to the correct shipment of the float, the concept and the different types of shipment. Now there are two main ways that you can use in the distribution of the weight of a float:

• Distributed ogruzka - increasingly used for fishing in deep water. It allows you to make noise casting minimum, so as not to scare away the fish. In addition, the weight distribution is carried out so that the bait maximally smoothly plunged into the depths.
• Concentrated ogruzka - also used for fishing in deep water. But here in the course are heavy equipment, immersion that can not be made invisible. Concentrated ogruzka recommended only in those cases when the bite is good, and the fish in deep enough.

Distributed ogruzka

Distributed ogruzka - a universal method which is suitable for different types of fishing, it is quite informative when submerged in standing water and in the presence of flow. Also, this option is more sensitive and responsive to the bite, which greatly increases the likelihood of a good and quick catch in deep water. But this method has its drawbacks: it is not very effective in shallow water, ie where there is a depth of half a meter...

Concentrated ogruzka

This option is more suitable for catching fish cautious. This is due to the fact that there shepherd boy substantially removed from the main load. This embodiment such mounting when snap poorly responsive to biting, so when using such a method ogruzki need to be as careful not to miss the bite.

And in the first and in the second option has its pros and cons. The choice is a fisherman. In many ways, this choice depends on the amount of fish, of its nature, the depth of the water (or standing there for).

How to ship float on carp

The first step is to choose a good float. It should be used for long casts, have a long antenna and have a high sensitivity. In specialty stores any knowledgeable seller will be able to offer you options for the floats, which are designed especially for catching carp.

If the choice of the float is made and you are sure that this is the best option for catching carp, you should take up his ogruzku. It is also a very important issue for catching fish such as carp. The right is the one shipment, where the entire top of the float is above the water. In such submerged part by volume of the float is completely submerged. There is one proven way to ogruzki home on carp. To do this you will need 1, 5 liter bottle of water. Ogruzhenny bit float drops into the bottle, then you just need to watch him dive. Pellets are added up, as long as all of the float body is submerged.

Certainly, such manipulation is not necessary to carry out at the pond. Ogruzku correct can be determined directly on the pond. But to save time on fishing, it is recommended to use home-ogruzki float on carp.

As you can see, with the correct shipment of the float, you can expect a good catch. Slightly different shipment on carp, but nothing difficult in this method no. In the article all the existing answers to the question of how to properly ship float has been described. If you follow all of the recommendations of experienced fishermen, the fishing will bring you not only aesthetically pleasing, but also bring a good catch.