How to apply shellac nails on right? How to apply glitter or pattern on shellac home?

How long have you been dreaming of a perfect manicure, which can hold on the nails for more than two weeks? And it is possible to invest in a costly procedure in a beauty salon just not? Well, we'll show you how to apply shellac house that he and kept for a long time, and look at this beautiful and attractive. In addition, as far as possible we try to replace expensive drugs more affordable for every woman means.

What is this kind of nail polish?

Shellac, varnish or gel - a special coating to the nail, which is able to hold them for 2-3 weeks. Thanks to its special formula, it is significantly different from the standard means of varnish, it does not scratch and does not break. It gives natural nail strength and flexibility simultaneously. In turn, the gel coat protects the nail plate from the harmful effects of the environment that has a positive effect on her condition. Art how shellac applied to the nails, each woman can learn. To do this, you need to purchase a number of inexpensive tools, which we describe below, and tune in to a positive result of your labors.

Some of the nuances of

Before performing this procedure, you need to figure out exactly how to apply the shellac. If the process is performed in the wrong sequence will be admitted or any errors, the gel coat may be deformed, resulting in not properly be fixed on the nails. The procedure itself is divided into three stages: application of the basics of the coating and finishing fixer. Also note right away that you can achieve different color effects, using shellac varnish. How to apply - it is one thing, but then, how many layers will affect the intensity of the colors. If you put the coating in a single layer, then the nails will remain a mysterious tone, translucent and very tender. Two layers give more saturated color. Another important point is the use of oils and creams. At least one droplet of this substance can reduce all the qualities of the gel coat to zero. Because the day before to apply shellac, it is not necessary to handle the hands and nails similar substances.

Preparation of polish to the

No, even the most miraculous coating does not hide the uneven shape of the nail, overgrown cuticles and other disadvantages. Because before you apply shellac home, you must give the shape of the nail, as well as see to it that they all have the same length. Then a wooden stick shift to the base of the nail and cuticle cut off her hatchet. Note that all of these operations must be carried out on a dry nail. Do not use any water or oil, nor any cream or moisturizer. Now polishes nail plate ordinary nail file. As a result, it should be rough - so the gel will take better and last longer. Now remove the dust formed during grinding, process nails antibacterial fluid.

Degrease the nail plate

Immediately prior to applying shellac, should be thoroughly degreased nails to gel coat fell on them more durable and lasted very long. To do this, you can buy a special tool, called bonder-gel. Put it on each nail, you can use an ordinary brush to polish, but the main thing is - do not overdo it. The layer you put on each nail should be as thin as possible. Once this tool is dry, the nails should see a small matt gleam. If the nails become fat, it means that the gel is applied with a surplus. Remove it, you can wipe or a few strokes of the grinding nail file.

The initial procedure

Now we will specifically consider how to apply the shellac. The first step - the nails are covered with transparent gel-base. It is not necessary to apply very thin but not very thick, and immediately after treatment Bonder nails. Dry this layer must first under ultraviolet lamp for 20-25 seconds. After that, the nails will be sticky dispersion. Shoot it in any case impossible, and to fix, nails need more time to dry in the LED-unit. This procedure can not last more than 10 seconds, whereupon the nail plate becomes flat, smooth, glossy sheen gain.

color coating

To gel manicure served you long and has retained its beauty for two weeks or more, it is important to choose a quality product. Affordable, yet highly reliable considered "Blyuskay" -shellak. How to apply it on the nails and removed quite easily, besides it is evenly distributed over the surface, dries quickly and does not deform. Stain each nail plate must thin layer using the brush, which is situated in the vial.

The layer of gel polish color should be as thin and uniform. To begin this procedure should be with the little finger of his right hand, then the finger is dried under the ice-lamp. Followed by the left hand little finger, then ring the right, then left, and so on. That is, starting from the fifth finger, alternately prokrashivaya right and left hand, and finish first. This will allow the varnish is not spread during the tilting arms, not to get on your skin and cuticles.

to achieve more saturated color

If you wish to have your nails were slightly covered with lacquer, and he poured a slight touch, it is quite enough to be a single layer of gel varnish on nogtiki. To color has become much more crowded, regardless of whether you are using red, dark cherry or beige, over-lamination. Shellac in this case is distributed on the nails similarly as in the first time - a thin uniform layer. We begin to paint again with the little fingers of both hands, gradually moving to the big toe. Only now every time prosushivaya separate nogtiki under the UV lamp, it is necessary to make sure that the exposure time is at least 40 seconds. Since the second layer is a gel coating affixed on the nail plate, with the first grab better and will last longer.

The final procedure

Now your nails are handled transparent gel layer, which not only covers all the previous ones, but also paints the nail end. Once gel-fixer is applied to the fingers, it is necessary to dry under UV lamp for 40 seconds. After that on nails is formed an adhesive layer to be removed. For this purpose, ordinary cotton sponzhiki. One sponge can be spent on the three nails, no more. Surplus adhesive gel layer which will remain on the wool may scratch the remaining nails and nail polish fade. Also, in order to soften the cuticles after dry manicure or after exposure to a huge amount of ultraviolet light, it is necessary to drip oil on it. This oil can be any solution, flavored or not. Buy it best in the pharmacy.

Picturesque masterpieces manicure

Applying the technology of applying the gel polish, you can create any image on nails. This will be done in the same way as in the case with conventional varnishes, only after each new layer will have nails to dry under a UV lamp. Well, stages a brief look at how to apply the pattern on shellac. First, we prepare the nails for the procedure, trim the cuticles, leveled shape, cover the gel base. Now we put the base color in one or two layers, as described in the instructions above. When the colored lacquer dries, proceed to the drawing. Thumbnail is also desirable to perform gel varnish so that it is not dimmed amid base coat. Once your patterns are ready and dry, we cover them with a fixer. Then everything we do, as in the usual procedure.

We direct gloss

The use of glitter or sequins simple now very common among young people. Often, this decorative element is present in manicure. To understand how to put glitter on shellac, much time would be required. It is only important to learn the previous instructions, and on its basis have to add a variety of accessories. Thus, after the nail is treated and coated with the first transparent gel layer put on it the colored base. Thereafter, mix a small amount of the same colored lacquer with glitter, causes the mixture as a second layer. Anchoring all this transparent gel, do not forget to dry. A similar technique can be applied to all the nails, and you can come up with a more interesting design.